New Job Vacancies At Weatherford – Oil & Gas – 4 openings

Job title: MFC Field Technician

Business Unit; Managed pressure Drilling – Secure Drilling Services

Job location: Nigeria – Port Harcourt

National hire                                   

Job Purpose

• Demonstrate a personal commitment to Quality, Health, Safety and the Environment.
• The primary responsibility of Field Technician is to deliver high quality services to our clients.
• Field Technician is responsible for ensuring that the preparation and dispatching of equipment is complete.
• Field Technician is also responsible to inspect/check the equipment when received at the wellsite for possible damage/malfunction during transportation.
• Field Technician is directly responsible for the quality of service delivered at the wellsite, in terms of safety, quality and efficiency of operation.
• Setup and Operates RCD/MFC control systems. 
• Conducts maintenance of RCD/MFC control systems equipment at job site and workshop.
• Has strong Electrical/Mechanical knowledge that allows the RCD/MFC Control Systems Specialist to troubleshoot wellsite equipment failures
• Is responsible for own continuous development to become capable to run the service in difficult and non-routine environments

Duties and Responsibilities

• Equipment rig-up and rig-down on each well.
• Perform various duties around the managed pressure drilling choke manifold, data acquisitions system, rotating control head, separation equipment, fluid handling and transfer systems, ensuring that all procedures are followed in accordance with the safety precautions and practices. 
• Operate and Monitor rotating control head, choke manifold and separation system, with sampling and manual data recording.
• Perform maintenance and system checks at the well site.
• Perform repairs and troubleshooting in case of equipment failure.
• To advise and assist the Supervisor with any pre-activity safety meeting action points that should be discussed
• To fully learn and ensure the compliance of, and the implementation, of all QHSE procedures during the operational activity
• Responsible for QHSE procedures and documentation on site for specific shift.
• Conduct themselves in a professional manner while on or off the rig site
• The job requires direct contact with the other crew members and Customer Representatives as well as other Services on location.
• Perform green tag procedures in the workshop or the field.
• Perform daily preventative maintenance as per the checklist.

Skills / Competency/ Knowledge

• This job is an experienced operation position for RCD / MicrofluxTM control systems. Trainees and post-School personnel are expected to evolve fast and be capable of running the service independently in a routine environment. The candidate is expected to continue developing until he/she reaches a competency level to run the service in difficult and non-routine environment.  
• Excellent communication skills (both oral and written).
• Hands on training required on valves, chokes, HPU and flow meter and pass certification on the following theoretical courses available on the web. Refer to SD Training Matrix      
• Proven ability to work in a team environment.
• Strong computer software skills, basic networking and ability to troubleshoot a connection.
• Long shifts, regularly 12 hours on site.
• Requires extensive travel both domestically and internationally and extended stays away from home.
• Skills in electronics, PLC systems and IT.
• Knowledge of analog and digital electronics, soldering techniques, oscilloscopes are an advantage
• Hands-on mechanical skills and redressing gate valves and replacing bearings.

Qualification required:

• Technical Degree related to the Oil & Gas Industry or related experience
• Previous field experience in Electrical / Mechanical technology

CLICK HERE TO APPLY

MFC WELL SITE SUPERVISOR

Job title:  Microflux Field Engineer

Business unit: Managed Pressure Drilling                   

Job location: Nigeria- Port Harcourt

International hire, rotational role                                             

JOB PURPOSE

• Demonstrate a personal commitment to Quality, Health, Safety and the Environment.
• The primary responsibility of Field Engineer is to deliver high quality services to our clients.
• Field engineer is responsible for ensuring that the preparation and dispatching of equipment is complete.
• Field engineer is also responsible to inspect/check the equipment when received at the well site for possible damage/malfunction during transportation.
• Field engineer is directly responsible for the quality of service delivered at the well site, in terms of safety, quality and efficiency of operation.
• Field engineer will need to know the installation of software, interaction of the Database and remote transmission of the data to the central server, how to fix the software problems in the field and apply the patches when required.
• Field engineer is in charge of equipment assigned to him/her during the job and for the maintenance request at the end of the job.
• Field engineer is responsible for the training and development of junior personnel assigned to his/her operation.

DUTIES & RESPONSIBILITIES:

• Operates and monitors the MicrofluxTM operations.
• Analyze well data and screen wells as potential for the use of MicrofluxTM techniques in real time.
• Perform green tag procedures in the workshop or the field.
• Primary technical support for MicrofluxTM control systems and its components.
• Responsible for QHSE procedures and documentation on site for specific shift.
• Provide technical support to customer representative on location and at base.
• Responsible to operate the MicrofluxTM system on the rig on 12 hr. shifts and ensure accuracy and consistency of data acquisition.
• Be proficient in the basic operating principles of the system, how to run the software and what different functions are available.
• Be proficient in the function of the various components of the system on the manifold, valves, chokes, HPU, sensors, and be able to repair those.
• Reports to the Well Site Supervisor while on location.
• Supervise Service Operators with downhole operations.
• Perform daily preventative maintenance as per the checklist.
• Keep records of events during the 12 hrs. shift including screenshots and filling in the daily report accordingly.
• Interface with the client, drilling contractor and directional drilling provider to advise during the drilling periods and to provide solutions to issues if required.
• Ensure the well is drilled in compliance with the program.
• Specify injection rates (where applicable) and back pressure on the well to ensure all MPD drilling criteria are filled.
• Advise driller or company man of any event or problem identified in the field with strong technical knowledge of downhole conditions.
• Attend meetings and conference calls when necessary.
• Writing daily and end of well reports.
• Assist in the rig up and rig down of equipment.

REQUIRED SKILLS:

This job is an experienced Filed Engineer position for RCD / MicrofluxTM control systems. Trainees and post-School personnel are expected to evolve fast and be capable of running the service independently in a routine environment. The candidate is expected to continue developing until he/she reaches a competency level to run the service in difficult and non-routine environment.

QUALIFICATION

• Completed Senior High School Certificate
• Bachelor degree in Engineering / Diploma  

COMPETENCY/KNOWLEDGE

• Knowledge of drilling and well control.
• Knowledge of computer and networking systems.
• Excellent communication (both oral and written).
• Preferable knowledge of analog and digital electronics, Soldering techniques, Oscilloscopes, networking, database servers, visual basic software,
• Strong technical knowledge of managed pressure drilling.
• Proven ability to work in a team environment.
• Strong computer software skills and troubleshooting network connections.
• Ability to work under pressure and capable of working long shifts, regularly 12 hours on site.
• Resourceful, systematic with trouble shooting capabilities

WORKING EXPERIENCE

Experience as Field Engineer

Related Oil and Gas experience

Oil & Gas relevant experience

 Job title: Project Engineer          

 Business Unit: Managed Pressure Drilling

Job location: Nigeria –Port Harcourt

International hire            

JOB PURPOSE

• Demonstrate a personal commitment to Quality, Health, Safety and the Environment.
• Project Engineer is responsible and accountable for the highest service quality delivery to the clients/projects assigned to him.
• Provide engineering before, during and after projects
• Mentor Field Engineers, train field personnel as well as client and third party on location if necessary.
• Provide technical support to Sales and Business Development

DUTIES & RESPONSIBILITIES:

• Off side technical focal point for ongoing project assigned
• Responsible for pre-evaluation, job design, simulations and analysis
• Be involved early in the Secure Drilling business process, conducting rig surveys, generating Process & Instrumentation Diagrams [P&ID], and creating a Master Equipment List [MEL] that meets Customer requirements. 
• Coordinate HAZID & HAZOP meetings with client in order to finalize, and obtain client sign off for P&ID, finalize the MEL, and generate detailed Operations Plan. 
• Work with Materials on the procurement of any additional items required for the package.
• Maintains close contacts with clients and ensures awareness of client activity,
• Be responsible for ensuring client requests are fulfilled in timely & efficient manner by conforming to both Weatherford standards & client specifications
• Plans adequately the equipment & personnel requirement for upcoming jobs
• Liaise with Maintenance team in order to ensure equipment readiness
• Develops effective client relationship.
• Job is project basis and requires good communication with client office and well-site regularly.
• Throughout the operation the MPD Project Engineer will attend shore based morning calls and assist in providing onshore support to both the client and Weatherford field team. 
• Upon completion of the project, the MPD Project Engineer will coordinate Post Job De-Brief and approve detailed End of Well Report.
• Training field personnel on project requirements and goals.
• Attending pre spud meetings
• Provide/modify job specific procedures and make sure those are followed
• Remote monitoring well
• Making sure achieving planned objectives with safe job practices
• Running critical on site operations when expertise required
• Reviewing EOWR
• Asses competency of field personnel
• Ensure Company policy are well understood, accepted & followed by personnel under his supervision,

REQUIRED SKILLS/KNOWLEDGE:

• Excellent communication skills.
• Good understanding of drilling and well completion operations.
• Good understanding of geology and geology related issues
• Knowledge of well control
• Proven ability of teamwork and leadership
• Problem solving ability
• Good understanding of Risk Assessment and Mitigation process
• Must have a clear customer focus
• Strong computer software skills.

QUALIFICATION REQUIRED

Bachelor degree in Engineering or relevant Oil & Gas experience

REQUIRED WORKING EXPERIENCE

• Technical Competency with product line Operations and Equipment
• Must possess a Working Knowledge and Hands-On Experience in Drilling and Completion Operations.
• Field Operations Experience of Drilling and Completing Wells.
• Experience of competency and training processes and systems.
• Requires extensive travel both domestically and internationally and extended stays away from home.
• Previous oil field experience